Menu Close

LED Panel Indicator

LED Indicator are no touch electromechanical components  which are designed to emit light. The LED indicator when illuminated gives the signal of change or warning. For example a Red LED indicator is universally recognised as ‘stop’ or ‘no-entry’. Whereas , a Green LED indicator is universally recognised as ‘go’ or ‘enter’.  Our, LED indicators and panels are available in a variety of shapes and sizes to suit a range of designs and applications for a wide range of industries.

We have made it easier to find the correct LED indicator you may need by categorising it by material and size. Many of our LED indicators are support voltage 5V – 48V.

LED Options:

Select from full illumination or split-screen.

The display of the illumination can be full illumination, meaning it will display a single/bi-colour/RGB colour illuminating the entire surface of the indicator or it can be split.

Some of our plastic LED panels can support split-screen options from two, three of four split options to display colours together or separately.

LED Illumination Options

Single LED Illumination A single LED illumination is the display of a single LED colour.
Bi-Colour LED Illumination A bi-colour LED switch means it can display two colours together or switch between two LED illumination.
RGB LED Illumination Switches that are listed with ‘RGB’ LED illumination, with the combination ‘red’, ‘blue’ and ‘green’, over 16million hues of light can be achieved. However, some pinks and browns are difficult to achieve.

LED Colours Options:

The guide - how to select the correct anti vandal switch -RJS Electronics Ltd LED Illumination

Red | Yellow | Blue | Orange | Green | Amber | White

*actual LED illumination will vary in tone due to materials and voltage used.

Terminal Options

Choose from screw terminals or connector type or Solder-lug terminals. All terminal options are designed for fast and easy installation.

Ip Rating

What are IP ratings?

IP Ratings explained by rjs electronics Lt. IP 67, IP68.
IP ratings are standards set out by IEC (International Electrotechnical Commission) under the 60529 standards document which specifies a classification system on the effectiveness in the sealing of enclosures of electrical equipment. This looks at the protection of factors such as dust and water/moisture.

The IP rating will depend on how hard wearing or weatherproof the component needs to be. For example, a metal push button switch in a swimming pool will need to be waterproof and hence this product will need a higher IP rated switch.

See the chart below outlining the IP rating and its characteristics.

Sizing:

Our plastic and metal LED indicators are available from 6mm to 30mm, choose from rectangular, round or square shape.

Applications:

Led indicators can be used in by a wide variety of industries for a range of applications. Here is an example of the industries and types of applications.

  • Automotive
  • Medical devices
  • Door entry / Security
  • Industrial Controls
  • Cosmetic (hair and beauty) electronics devices
  • Audio/Video
  • Boatbuilding & Marine

How to order?

We operate Monday – Thursday 8 am – 5 pm and Fridays 8 am – 4.30 pm, call us on +44 (0)1234 213600 to speak to our Sales Engineers or e-mail us on [email protected] alternatively, leave us a message using our online contact form.

Download our latest brochure and Product Catalogue. Join our mailing list to get the latest news, read our blog posts and see our latest products.

Read more
🔝

LED Panel Indicator

LED Indicator are no touch electromechanical components  which are designed to emit light. The LED indicator when illuminated gives the signal of change or warning. For example a Red LED indicator is universally recognised as ‘stop’ or ‘no-entry’. Whereas , a Green LED indicator is universally recognised as ‘go’ or ‘enter’.  Our, LED indicators and panels are available in a variety of shapes and sizes to suit a range of designs and applications for a wide range of industries.

We have made it easier to find the correct LED indicator you may need by categorising it by material and size. Many of our LED indicators are support voltage 5V – 48V.

LED Options:

Select from full illumination or split-screen.

The display of the illumination can be full illumination, meaning it will display a single/bi-colour/RGB colour illuminating the entire surface of the indicator or it can be split.

Some of our plastic LED panels can support split-screen options from two, three of four split options to display colours together or separately.

LED Illumination Options

Single LED Illumination A single LED illumination is the display of a single LED colour.
Bi-Colour LED Illumination A bi-colour LED switch means it can display two colours together or switch between two LED illumination.
RGB LED Illumination Switches that are listed with ‘RGB’ LED illumination, with the combination ‘red’, ‘blue’ and ‘green’, over 16million hues of light can be achieved. However, some pinks and browns are difficult to achieve.

LED Colours Options:

The guide - how to select the correct anti vandal switch -RJS Electronics Ltd LED Illumination

Red | Yellow | Blue | Orange | Green | Amber | White

*actual LED illumination will vary in tone due to materials and voltage used.

Terminal Options

Choose from screw terminals or connector type or Solder-lug terminals. All terminal options are designed for fast and easy installation.

Ip Rating

What are IP ratings?

IP Ratings explained by rjs electronics Lt. IP 67, IP68.
IP ratings are standards set out by IEC (International Electrotechnical Commission) under the 60529 standards document which specifies a classification system on the effectiveness in the sealing of enclosures of electrical equipment. This looks at the protection of factors such as dust and water/moisture.

The IP rating will depend on how hard wearing or weatherproof the component needs to be. For example, a metal push button switch in a swimming pool will need to be waterproof and hence this product will need a higher IP rated switch.

See the chart below outlining the IP rating and its characteristics.

Sizing:

Our plastic and metal LED indicators are available from 6mm to 30mm, choose from rectangular, round or square shape.

Applications:

Led indicators can be used in by a wide variety of industries for a range of applications. Here is an example of the industries and types of applications.

  • Automotive
  • Medical devices
  • Door entry / Security
  • Industrial Controls
  • Cosmetic (hair and beauty) electronics devices
  • Audio/Video
  • Boatbuilding & Marine

How to order?

We operate Monday – Thursday 8 am – 5 pm and Fridays 8 am – 4.30 pm, call us on +44 (0)1234 213600 to speak to our Sales Engineers or e-mail us on [email protected] alternatively, leave us a message using our online contact form.

Download our latest brochure and Product Catalogue. Join our mailing list to get the latest news, read our blog posts and see our latest products.